Project - Pincushion Cactus Large Pyramage Card

Lovely prickly pincushion cactus card - it looks like it has two bunny ears!

For this one print:-

The Pincushion Cactus large pyramage sheet onto quality white card
3 sheets from the Red Digital Paper pad - both the red and cream floral trail sheets and the cream spiky flower sheet

The Pincushion Cactus large pyramage sheet can downloaded for free by clicking here. Click on the link to open the image in Adobe Acrobat reader - if you need it you can download it for free by clicking on the button below.

 

To make the card, cover the front of a cream or ivory A5 card blank with the red floral trail paper using double-sided tape.

Cut a 18 x 4.8cm piece of the cream spiky flower paper and a 12.7 x 3cm piece of the cream floral trail paper. Mount both pieces onto larger pieces of silver metallic card and trim round with a craft knife and ruler to leave a small border.

Add a 12.7 x 2.5cm strip of the cream floral paper to the card blank with double-sided tape - around 7mm from the bottom of the card.

Make up the pyramage stack - I've done this one with just another layer of scrap card between each piece, stuck with double-sided tape. 

This was because I came to the conclusion that I have so many pyramage cards made up with sticky pads that are just too thick to post. By making up the stacks with card instead, it makes them much firmer - and more importantly, thinner and less bulky to send through the post.

I'll probably do them all with card from now on......

Arrange the two metallic-card mounted pieces, the pyramage stack and a greeting on the card. When you're happy with the arrangement, stick the metallic-card pieces to the card with double-sided tape, then add the greeting and the pyramage stack with further d-s tape.