52fa3d993bb8fimage2.jpg

This beer monster card is a simple design that combines our purple beer backing paper with the Happy Father's day wording sheet from the same set. An A6 hammer white card blank has been used here.

Print the purple beer background onto white hammer paper and cut a piece measuring 10.5cm wide x 9.5cm tall. Fix to the front of the card blank with double-sided tape. Trim a piece of purple metallic card to measure 10.5 x 1.4cm. Using double-sided tape, add the metallic strip to the top edge of the printed background so that it overlaps it slightly.

Print the purple Happy Father's Day sheet onto white hammer paper and cut a 6 x 8cm tall piece. Stick this using double-sided tape to a larger piece of purple pearlescent card and trim the card to leave a half centimetre border all round. Mount the panel to the card blank with sticky pads - or I like to use pieces of fun foam for larger area to save fiddling around with little sticky pads. You can either use double-sided tape on both sides of regular fun foam to make your own 'sticky pad' or add the double-sided tape to just one side of self-adhesive fun foam to save all the work. Great for mounting bigger pieces as it can easily be cut to size and it's very cost-effective too!

Once your panel is mounted, add a shop-bought Beer monster die cut to the card using either sticky pads or fun foam.

Products used on the Beer monster card


Public Domain Image Library